Short answer
The fishbone prayer plant is Ctenanthe burle-marxii, a small ground herb endemic to Espírito Santo in Brazil's Atlantic Forest [1][3]. Grow it in partial shade and a moist but well-drained loam [5]. Its fine, densely branched roots [7] dry and rot quickly, so water little and often rather than deeply and rarely. The cultivar 'Amagris' has been observed to tolerate 5 to 30 °C [7], but steady warmth gives the best leaves, and light below about 150 foot-candles degrades Ctenanthe indoors [9].
Which plant is the fishbone prayer plant?
Fishbone prayer plant is the English vernacular name recorded for Ctenanthe burle-marxii H.Kenn. in the Catalogue of Life, alongside the Portuguese nunca-nunca [6]. In the RHS profile it is tender and evergreen, about 60 cm at most; its pale green leaves carry dark green bands in a fishbone pattern above and are purple below, on softly hairy stems tinged purple [5]. The fishbone is the row of dark bars running from the midrib out along the lateral veins.
Helen Kennedy described the species in 1982 from plants already in the horticultural trade, naming it for the Brazilian landscape architect Roberto Burle Marx, together with a variety, var. obscura [4]. The most common commercial form is the cultivar 'Amagris', grey-leaved and smaller than the species; its plant patent describes a plant about 17 cm tall and 28 cm across grown in a 12-cm pot [7]. A plant sold as Calathea burle-marxii is a different species, now Goeppertia burle-marxii; the names are untangled on the Burle Marx names page.
What does its home range say about its needs?
The Brazilian national checklist records C. burle-marxii as endemic to Espírito Santo, in the Atlantic Forest phytogeographic domain [3], and its type specimen, Kennedy 4089 at the Rio de Janeiro Botanical Garden herbarium, comes from that state [2]. The checklist classes it as a terrestrial herb of ombrophilous forest, the evergreen rain forest of the coastal slopes [2]. Kew's POWO agrees on Espírito Santo but assigns it to the seasonally dry tropical biome [1].
The two descriptions bracket the plant's tolerances rather than contradict each other for a grower. A rain-forest herb wants humid air and soil that never dries out completely; a plant whose range touches seasonally dry forest is likely to survive a dry spell. That fits what is known of its closest relatives: Luna and colleagues (2025) place C. burle-marxii in a subclade with C. setosa and C. kummeriana [14], and C. setosa survives 40 to 49 days without water by rolling its leaves [11]. Leaf rolling in a fishbone prayer plant is therefore a drought response first, and the cure is water, not a change of position.
The size of C. burle-marxii also follows from its habitat. A herb at most about 60 cm tall [5] lives in the deepest layer of the forest, under shrubs as well as trees. Its leaves are built for diffuse, shaded light, which is why the RHS places it in partial shade on a sheltered aspect [5].
How much light does the fishbone prayer plant need?
The RHS gives partial shade on a west- or east-facing aspect, sheltered [5], and NParks Singapore rates 'Amagris' for semi-shade to full shade [8]. Those ratings are for outdoor or glasshouse light, which is far brighter than a room. Indoors the binding limit is too little light, not too much.
No interior light trial on C. burle-marxii itself was located. The best evidence for the genus is Charles Conover's University of Florida trial on Ctenanthe 'Loursii': after 120 days in simulated interiors, only plants at 150 foot-candles were still very attractive, and the number of leaves with brown necrotic spots increased as interior light decreased [9]. Conover treats 150 foot-candles as the minimum for related Marantaceae indoors [9]. For a fishbone prayer plant that means a bright room within view of the sky but out of direct sun; in the same trial series, 'Loursii' grown under only 50 percent shade carried more necrotic leaves than plants grown under 60 to 70 percent shade [9], so strong direct sun is a risk too. Too little light shows first as weak, leaning growth and duller banding.
How should a fishbone prayer plant be watered?
The roots set the pattern. The 'Amagris' patent describes them as fine, freely branching and dense, creamy white in colour [7]. Fine roots have a large absorbing surface but little storage, so they dry and die back faster than thick roots and rot faster in waterlogged soil. The RHS profile asks for moist but well-drained loam [5], and NParks lists moist, well-drained, fertile loamy soils for 'Amagris' [8]. In practice, water when the top 1 to 2 cm of the mix is dry, let the excess drain away, and use a pot only slightly larger than the root ball, because a small plant in a large volume of wet mix is the commonest way to lose it.
Humidity is better supplied through the air than on the leaves. NParks lists occasional misting [8], but leaf wetness carries a specific risk for this genus: Pappas and Paplomatas (1998) found that Pyricularia leaf spot, which attacked C. setosa and C. oppenheimiana in Greek glasshouses, was favoured by prolonged leaf wetness combined with high temperature and humidity [10]. A tray of moist gravel under the pot, as the RHS recommends for the genus [12], raises humidity around a low plant without wetting it.
What temperature and feeding suit it?
The 'Amagris' patent reports that plants have been observed to tolerate temperatures from 5 to 30 °C, and that the described plants were grown in a Belgian glasshouse at about 20 to 21 °C day and night [7]. The lower figure is a survival observation in production, not a growing temperature: the RHS rates C. burle-marxii H1B, a plant that can stand outside in a UK summer but needs glass otherwise [5]. Steady warmth in the low 20s °C, away from cold draughts, gives the best growth.
Feed lightly. In the UF 'Loursii' trials, ammoniacal fertilizer caused tipburn, an effect Conover also reports in other Marantaceae, and plants given more fertilizer in production declined faster once moved indoors [9]. A balanced liquid feed monthly in spring and summer, with nitrogen mostly as nitrate, is enough for a plant this size. Brown tips on a well-watered plant point first to salts or fluoride, which UF/IFAS lists as a cause of marginal dead spots in Calathea [13].
How is it propagated, and what attacks it?
The RHS gives propagation by seed or by division in spring [5]. For the cultivar, seed is not an option: the 'Amagris' patent records that seed and fruit development has not been observed, and the cultivar is multiplied commercially by tissue culture, with roots initiating in about 21 days at 20 to 21 °C and a rooted plant produced in 14 to 16 weeks [7]. At home, divide a crowded clump in spring, keeping several leaves and a share of the fine roots on each piece, and hold the divisions warm and humid until new leaves appear.
The patent states that 'Amagris' has not been observed to be resistant to the pathogens and pests common to Ctenanthe [7]. NParks lists chewing and sucking insects for it [8] and the RHS names mealybugs [5]; check the leaf bases and the hairy stems, where they shelter. The ASPCA plant lists have no entry for Ctenanthe under any name [15], so no claim is made here about safety for cats or dogs.
Frequently asked questions
Why are my fishbone prayer plant leaves curling?
In Ctenanthe, curling is primarily a drought response. The close relative C. setosa rolls its leaves as it dries, which reduces leaf area and transpiration [11]. Check the root zone first; the fine, dense roots of C. burle-marxii [7] dry out quickly in a warm room.
How big does a fishbone prayer plant get?
The RHS gives about 60 cm for the species [5]. The cultivar 'Amagris' is much smaller: its patent describes a plant about 17 cm tall and 28 cm across in a 12-cm pot, with leaves about 9.6 by 4.6 cm [7].
Is the fishbone prayer plant a Calathea?
No. It is Ctenanthe burle-marxii, described by Helen Kennedy in 1982 in the same paper as Calathea burle-marxii, a different species from Bahia [4]. That Calathea has since been moved to Goeppertia; the Burle Marx names page sets out the history.
Can a fishbone prayer plant take cold?
Briefly. 'Amagris' has been observed to tolerate 5 to 30 °C in production [7], but the RHS rates the species H1B, needing glass except in a UK summer [5]. Keep it in steady warmth and away from cold draughts.