Short answer
Almost all commercial calathea production starts from tissue-culture liners, according to UF/IFAS [1]. A rhizome bud is sterilised and grown on a Murashige and Skoog medium with a cytokinin to multiply shoots, then moved to an auxin medium to root [2]. The process is fast but not genetically silent: new calathea cultivars come mainly from somaclonal variants [1], and 'Dottie' was found among tissue-culture plants of Goeppertia roseopicta [7].
Why are calatheas grown in flasks instead of divided?
A calathea in a pot multiplies only by its rhizome, the short underground stem that produces new shoots at its nodes. UF/IFAS's production guidelines describe the traditional method as division, with each rhizome piece carrying at least one leaf, and note that only a few species, such as C. micans, can be raised from seed [1]. Division yields a handful of plants a year from each stock plant. The same guidelines state that almost all commercial production now uses liners (young plants for potting on) from tissue culture [1].
Scale explains the shift. In 1975, UF/IFAS records, only three species were commonly grown in the United States, C. insignis, C. makoyana and C. roseopicta; by the time of its guidelines at least 15 species and about 35 cultivars were in production [1]. Micropropagation, the multiplication of plants from small pieces of tissue on sterile nutrient media, lets one selected plant be multiplied far faster than its rhizome allows. Rozali and colleagues, who published the first mass-propagation protocol for Calathea crotalifera, gave the same reason: rhizome cuttings grow very slowly and cannot supply large-scale cultivation, so an in vitro method was needed [2]. Note that C. crotalifera is one of the species that stayed in Calathea after the 2012 revision [11][12]; the patterned houseplants now in Goeppertia are handled the same way, as the patent records below show.
How does a calathea micropropagation protocol work?
The C. crotalifera protocol is the most fully published one for the group, and its authors compare each stage with other rhizomatous ornamentals such as Heliconia and Alpinia.
- Explant and sterilisation. The explant is the piece of plant that starts the culture. Buds taken straight from soil-grown rhizomes were badly contaminated, so the authors let axillary buds (buds in the angle of a leaf base) sprout from washed rhizomes kept out of soil. These had 25% contamination against 60% for apical buds, and the contaminants were bacteria, not fungi [2]. A sequence of sodium hypochlorite, ethanol and mercuric chloride gave the best survival [2].
- Multiplication. Shoots were multiplied on Murashige and Skoog (MS) medium, the standard mineral recipe, with 3.5 mg/L of the cytokinin BAP (6-benzylaminopurine, a hormone that promotes shoot formation), 1.0 mg/L of the auxin NAA, 3% sucrose and 6 g/L agar [2]. The best line produced 5.6 shoots per explant; above 3.5 mg/L BAP, shoot numbers fell and tissue began to die [2]. For C. ornata, an earlier study by Podwyszyńska reported optimum multiplication with 2.5 mg/L BAP and 2.5 mg/L kinetin [2].
- Breaking apical dominance. A calathea shoot tip suppresses the buds below it. Cutting the young shoot lengthwise before subculture released those buds and gave the most microshoots, a step the authors call important for ornamentals with a naturally low multiplication rate such as Strelitzia and Calathea [2].
- Rooting and weaning. Separated shoots rooted best on MS with 1.0 mg/L NAA rather than IBA [2], and plantlets were weaned in a greenhouse under plastic covers that were removed gradually [2].
What goes wrong inside the flask?
The two recurring faults in the C. crotalifera work were necrosis and hyperhydricity: most multiplied plantlets showed dead or water-swollen leaves on the first medium [2]. Hyperhydricity, also called vitrification, is a malformation in which tissue becomes glassy and water-soaked; it was worst at the lowest agar concentration, and the authors note that hyperhydric plantlets make poor epicuticular wax, the waxy layer on the leaf surface that limits water loss [2]. Activated charcoal in the medium gave dark green plantlets, and L-glutamine gave plantlets free of necrosis [2].
That wax deficit matters after the flask. A plantlet raised at near 100% humidity with thin wax loses water fast when moved into ordinary air, which is why the protocol weans plantlets under plastic and removes it in stages [2]. It is also a reason why a newly potted tissue-culture Goeppertia liner is more fragile than a division from an established clump: its first leaves were built for a sealed vessel.
Why do new sports keep appearing from tissue culture?
Plants regenerated in culture are not always identical to their source. The variation is called somaclonal variation, and Krishna and colleagues define it as genetic variability generated by tissue culture through gene mutation or changes in epigenetic marks, the chemical tags that switch genes on and off without changing the DNA sequence [3]. Its causes include oxidative stress during culture initiation and subculture, and its frequency rises the longer a culture is kept: in banana, somaclonal variants increased after the eighth subculture while the multiplication rate fell [3]. Bud-sport research adds that tissue culture is among the stresses known to activate transposable elements, stretches of DNA that can move within the genome [14].
For calathea breeders this is a feature as much as a fault. UF/IFAS states that new calathea cultivars continue to be released by tissue culture laboratories, primarily from somaclonal variants [1]. The patents show it directly: 'Dottie' was a naturally occurring mutation selected from tissue-culture-derived C. roseo picta in Apopka, Florida, in March 1998 [7]. A genetic study by Chao, Devanand and Chen of 34 calathea cultivars found that 19 formed a single cluster derived from C. roseopicta or C. loesneri, of which at least nine came from somaclonal variants or sports, and warned of the genetic vulnerability that such close similarity brings [4].
What happens to a variegated clone in culture?
A variegated calathea is often a chimera, a plant whose growing tip contains layers of genetically different cells. Whether the pattern survives micropropagation depends on how new shoots form. When a culture multiplies existing buds, each new shoot inherits the layered tip. When shoots arise adventitiously, from tissue that was not already a bud, they may come from a single layer. Work on African violet (Saintpaulia) found that micropropagation by adventitious shoots often gives plants with patterns different from the mother, explained by periclinal chimeral separation, because a shoot formed from one layer carries only that layer's genotype [5].
This is why calathea patents report stability testing. 'Rosy' was increased by tissue culture, which demonstrated the stability of its characteristics over generations [6]. 'PP0005' was first reproduced by tissue culture in Holland in January 2007 and has since produced several generations by micropropagation with its features stable [8]. 'Mysty' has been reproduced by in vitro meristem culture since 2 May 2017, about 13 months after it was found [9]. By contrast 'FUSION WHITE', a variegated selection of Goeppertia lietzei, was first multiplied by vegetative cuttings and tested for two years for stability of its variegation [13]. See calathea variegation for how these patterns are built.
What does tissue culture mean for the plant on a shop shelf?
Three practical consequences follow. First, a tissue-culture start is not permanently disease-free. The UF/IFAS foliage note on calathea production says of a nonfluorescent Pseudomonas blight that tissue-culture plants may be free of the disease when purchased but are as easily infected as cuttings [10]. The same note asks growers to inspect all incoming material, including plants from tissue-culture laboratories, for the tarsonemid mite Steneotarsonemus furcatus, whose early damage is a water-soaked or necrotic line parallel to the leaf margin [10].
Second, most calatheas of one cultivar on sale are genetically the same plant. That is what makes a patented clone such as 'Dottie' look identical in every pot [7], and it is also the genetic vulnerability Chao and colleagues flagged [4]: a pest or pathogen that suits one clone suits all of it. Third, an occasional odd plant in a batch, greener, paler or differently patterned, is somaclonal variation or chimeral separation at work [3][5], the same process that produced most of the cultivars in the trade. For home propagation the realistic route remains division; the patent rules that apply to protected cultivars are on the calathea plant patents page.
Frequently asked questions
Can I do calathea tissue culture at home?
The published protocol needs sterile handling, mercuric chloride or similar sterilants, MS medium with 3.5 mg/L BAP and 1.0 mg/L NAA, and months of subculture [2]. Contamination from rhizome bacteria was the main obstacle even in a laboratory [2], so division is the practical home method.
Are tissue-culture calatheas weaker?
Not in the long run, but young plantlets leave the flask with poor epicuticular wax, which limits water loss, and need gradual weaning under cover [2]. Once acclimatised they grow as normal plants of the same clone.
Why did my calathea from a batch look different from the others?
Tissue culture can produce somaclonal variants through mutation or epigenetic change [3], and variegated chimeras can separate when new shoots form from one cell layer [5]. UF/IFAS notes that new calathea cultivars mainly arise this way [1].
Which calathea species have published in vitro protocols?
Calathea crotalifera has a full published mass-propagation protocol, and its authors cite earlier work on Calathea ornata, Calathea orbifolia and Maranta leuconeura 'Kerchoveana' [2]. Ornata and orbifolia are now placed in Goeppertia.







