Short answer
Ctenanthe multiplies from its underground rhizome, so division of a clump into rooted offsets works for every species [1][4]. Species that build leafy canes, such as Ctenanthe lubbersiana and C. oppenheimiana, can also be grown from stem cuttings [1][2][5]. Patented clones such as 'VALCOSTA2' and 'Amagris' are produced commercially by tissue culture, with roots forming in about 3 to 8 weeks at 20 to 21 °C [8][9]. Seed is rarely available.
Why does growth form decide the method?
Every Ctenanthe grows from a rhizome, a horizontal underground stem that branches and sends up new shoots along its length. What happens above ground differs. Flora e Funga do Brasil describes Ctenanthe setosa as a rosulate herb, its leaves arising in a basal tuft from the rhizome [6], while C. lubbersiana has a caulescent aerial axis, meaning it raises its leaves on jointed stems [5]. Luna and colleagues score the genus as rosulate or caulescent and found that the caulescent shoot arose independently at least four times in the Maranta clade [7], so the two growth forms are not a reliable guide to relationship, only to how the plant is built.
The Horticultural Flora of South-eastern Australia gives the propagation of the genus as division and cuttings [1]. Those two methods map onto the two shoot types. A rosette species offers nothing to cut except whole shoots with their rhizome attached, so it is divided. A caned species offers a stem with nodes, the joints where buds and roots can form, so it can also be cut. Knowing which kind of Ctenanthe is on the bench tells you which tools apply before a knife touches it.
How do you divide a Ctenanthe into offsets?
An offset, in trade usage, is a side shoot that has grown up from the rhizome a short distance from the parent and has its own roots. In a Ctenanthe clump each leafy fan at soil level is a shoot of this kind, joined to its neighbours underground. The RHS recommends division in spring for C. lubbersiana [4], NC State says that species is best propagated by division [3], and researchers raising C. setosa for drought experiments vegetatively propagated their plants from rhizomes and grew them in a 5:1 peat and sand mix [10]. Division is the reliable method for the whole genus.
- Water the clump the day before, so roots are turgid and less brittle.
- Unpot it and work the root ball apart with the fingers, looking for natural break points in the rhizome between groups of shoots.
- Cut the rhizome only where it will not separate by hand, with a clean blade, keeping at least two or three leafy shoots and a mass of roots on each piece.
- Pot each piece at the depth it grew before, in a moist, open mix, and keep it out of direct sun and in humid air until new leaves appear.
The roots explain the care in step 2. The patent description of 'Amagris' records fine, freely branching, dense, creamy white roots [9], and the 'VALCOSTA2' patent describes roots 0.2 cm across that are fleshy, smooth and lacking root hairs [8]. Roots without root hairs absorb water only through their main surface, so every root torn off is lost absorbing area that a new division cannot quickly replace. Large pieces establish faster than single shoots for the same reason. The RHS gives the parallel advice for the sister genus Stromanthe: divide when dormant or after flowering, to minimise root damage [13].
Can a caned Ctenanthe be grown from stem cuttings?
Yes, and this is where Ctenanthe differs from the rosette calatheas now placed in Goeppertia. NC State lists propagation of C. oppenheimiana by division and stem cuttings [2], and the cane-forming C. lubbersiana carries branched aerial stems with nodes along them [4][5]. The UF/IFAS production guide for calatheas and their relatives describes commercial propagation by divisions or tip cuttings, with nodes to form the roots, and stresses mist and reduced light during the early stages [11]. The same principle applies to a cane: the roots form at a node, not from the cut end of an internode.
For C. lubbersiana, take a leafy top from a healthy cane with one or two nodes below the leaf fan. Trim the leaves by up to half if the fan is large, because a cutting without roots cannot replace the water its leaves lose. Insert the node into a moist, open mix or stand it in water, and keep it warm, shaded and humid under a clear cover. The leafy tufts that sit at the upper nodes of a mature cane are the natural material for this, and they are what growers often call cane offsets.
One claim needs care. No published record was located, in the extension, patent or taxonomic sources cited here, of Ctenanthe producing rooted plantlets spontaneously at stem nodes in the way some plants form aerial offsets. The method documented is a stem cutting that roots at the node once it is separated and kept humid [1][2][11]. Treat a cane tuft as a cutting, not as a ready-made plant.
How long does a Ctenanthe cutting take to root?
The only measured figures for the genus come from patent descriptions of commercial clones. US Plant Patent PP35039 for Ctenanthe oppenheimiana 'VALCOSTA2' records that the clone was first reproduced by leaf cuttings in May 2017 at the inventor's greenhouse in Maasland, the Netherlands, and then by meristem tissue culture [8]. It gives approximately 8 weeks to initiate roots at approximately 20 °C, and approximately 20 weeks to produce a well-rooted 10 cm container from a rooted cutting [8]. The patent describes 'VALCOSTA2' as a clumping plant with leaves emerging directly from the base and no main stems [8], so its leaf cutting would have carried a piece of shoot base with a bud; a leaf blade on its own carries no bud and so cannot produce a new shoot.
Those numbers set expectations for a home cutting. Two months without visible roots is normal at 20 °C, and a cooler room slows it further. Pulling a cutting to check it damages the first roots; new leaf growth is the reliable sign that a Ctenanthe cutting has rooted.
How do nurseries multiply patented Ctenanthe?
By tissue culture, also called micropropagation: growing new plants from shoot tips or meristems (the dividing tissue at a growing point) on a sterile nutrient medium, then rooting and weaning them. The 'Amagris' patent, PP14641, records propagation by tissue culture, about 21 days to initiate roots on a micropropagated plantlet and about 14 to 16 weeks to produce a rooted plant at 20 to 21 °C [9]. Scaramuzzi and colleagues published an in vitro propagation study of Ctenanthe lubbersiana in 1992 [12], which shows that the method was worked out for the genus decades before the current patented forms.
Tissue culture matters to buyers for two reasons. It is how a single sport, such as the 'VALCOSTA2' mutation found among 'Compactstar' plants, becomes thousands of identical pots [8]. And it carries legal weight: a US plant patent covers asexual reproduction of the protected clone. Google Patents lists PP35039 as active with an adjusted expiration of 2042-06-27 [8], while PP14641 for 'Amagris' is listed as expired [9]. For an in-term clone, any asexual multiplication, division included, falls under that right in the United States, so the expired Amagris and the active VALCOSTA2 are not in the same position.
Can Ctenanthe be grown from seed?
In principle. The RHS lists propagation of C. lubbersiana by seed sown at 19 to 24 °C in spring as soon as ripe [4]. In practice seed is rarely available, because indoor plants seldom set fruit and each fruit holds a single seed: the C. lubbersiana description records a papery capsule with one smooth seed carrying a yellow, layered aril [5]. Seedlings of a wild species also vary, and a seedling from a variegated plant such as Golden Mosaic will usually not repeat the variegation. For any named form of Ctenanthe, division and cuttings are the ways to keep the plant true.
Frequently asked questions
What is the easiest way to propagate a Ctenanthe?
Division of the rhizome into offsets in spring, with two or three shoots and plenty of roots per piece. The RHS and NC State both name division for Ctenanthe lubbersiana [3][4], and it works for rosette species as well.
Can I propagate a fishbone prayer plant from a cutting?
Ctenanthe burle-marxii forms a basal rosette with no aerial stems, so division is the practical method. Stem cuttings suit caned species such as C. oppenheimiana [2]. Single leaves without a piece of shoot base do not regrow.
Do Ctenanthe cuttings root in water?
A cane top with a node can root in water or in a moist mix; roots form at the node [11]. Expect several weeks: a patented C. oppenheimiana clone took about 8 weeks to initiate roots at 20 °C [8].
When is the best time to divide a Ctenanthe?
Spring, at the start of active growth, which is when the RHS recommends dividing Ctenanthe lubbersiana and also when it advises annual repotting [4]. New roots form quickly in warm conditions.