Short answer
Stromanthe thalia, including Triostar, is propagated by dividing the clump: the plant grows from a thick underground rhizome [1] and forms many basal clumps, about nine on a 20-week-old plant of the cultivar 'Valmic' [3]. Each division keeps the plant's layered tissues intact, which is why 'Valmic' has stayed true to type through division since 1999 [3]. Seed cannot carry a variegated pattern reliably, because only one cell layer forms the germ line [8]. Divide in spring before new growth starts [5].
What is being divided in a Stromanthe clump?
Under the soil, every Stromanthe grows from a rhizome, a horizontal underground stem. Flora do Brasil describes the genus as perennial herbs with a subterranean rhizomatous stem, the rhizome thick and without specialisations [1], meaning it forms no tubers or storage swellings like the edible rhizome of arrowroot. Roots arise along it as adventitious, threadlike roots [2]. Each bud on the rhizome can send up a shoot, and the aerial part of each shoot is caulescent, forming a stem that carries leaves above the base [1].
In a pot this produces a crowd of crowns. The plant patent for 'Valmic', a variegated Stromanthe sold under the old name Stromanthe sanguinea, describes a freely basally clumping habit with about nine clumps per plant, and a dense, freely branching white root system, on plants about 20 weeks old [3]. The RHS describes the genus as evergreen rhizomatous herbaceous perennials [6]. Division simply separates these naturally formed clumps, each with its own section of rhizome, roots and leaves.
That structure sets the rule for a good division. Every piece needs a section of living rhizome with at least one shoot and its own roots. Commercial guidance for the related calatheas states the same principle: the rhizome is divided so that each piece has at least one leaf [10].
Why is Triostar divided rather than grown from seed?
A variegated Stromanthe thalia is a chimera, a plant built from cells of two genotypes. A shoot tip has distinct cell layers: in most plants the outer L1 forms the epidermis (leaf skin), the L2 forms the tissues just beneath it and the germline, and the inner L3 forms the core of leaves and stems [8]. When a mutation that blocks chlorophyll production is confined to one layer, the leaf shows white or cream where that layer dominates and green where the normal layers show through.
Seed comes from the germline, which is the L2 alone [8]. A seedling therefore inherits the genotype of one layer, not the layered pattern of the parent. Where the white tissue is caused by a plastid mutation, as in the chimeric ornamentals studied by Park and colleagues, inheritance is also mostly maternal, through the plastids in the egg cell [9]. And a seedling that inherited only the mutant plastids could not survive: albino plastid mutations are typically embryo-lethal, which is why they persist in nature only inside chimeric plants [9]. Seedlings of a variegated parent are therefore expected to be green, or albino and short-lived, rather than another Triostar. Which mechanism underlies the Triostar pattern itself has not been published.
Division keeps all the layers together, because each new crown grows from a bud that already contains them. The 'Valmic' patent records that asexual reproduction by divisions in Honselersdijk, the Netherlands, since 1999 has reproduced its features stably and true to type [3]. The RHS lists seed as an option for the green species [6], where uniform offspring are not the point.
Is tissue culture or a cutting the same as a division?
Not quite, and the difference matters for variegated plants. Commercial Marantaceae are mostly started from tissue culture; for calatheas, almost all commercial production now uses tissue-culture liners [10]. Tissue culture can regenerate shoots from single layers of tissue. Work on striped African violets showed that adventitious shoots, buds that arise from tissue other than an existing bud, can come from only one layer of a periclinal chimera, so the regenerated plant may lose the pattern [11]. A Triostar regenerated that way may come out plain green or uneven, and growers select the true-to-type plants.
Tissue culture can also create new variation. The patent for the variegated Stromanthe stromanthoides 'ROTOLANTE10' states that its predecessor was placed into tissue culture, where somaclonal variations (genetic changes arising during culture) occurred, and that the variegated plant was selected from that population [4]. The same patent records propagation by vegetative cuttings and tissue culture through 12 generations [4], so cuttings of aerial shoots work in at least one Stromanthe species. No published report of rooting cuttings of Stromanthe thalia was located; for that species, division of the basal clumps remains the documented method [3][5].
When should a Stromanthe be divided?
North Carolina State Extension advises that propagation by division is best done in spring before new growth starts [5]. The RHS gives division when dormant, or after flowering, to minimise root damage [6]. Both point to the same window for Stromanthe thalia: the gap between the slow winter period, when the plant is also likely to be in flower [6], and the spring flush of new shoots.
The reasoning comes from the plant's habitat. Flora do Brasil places the species in Atlantic Forest vegetation that includes seasonally semideciduous forest [2], where the year has a cooler, drier spell and a warm, wet growing season. A division made just before that season gives the cut rhizome sections time to grow new roots while temperature and light are rising. A division made in autumn has to sit through the slow months on damaged roots. The 'Valmic' patent records the plant tolerating 15 to 30 °C [3], and a division recovers best toward the warm end of that range.
How is a Triostar clump divided?
Water the plant the day before so the root ball holds together, then slide it out of the pot. Shake or wash away enough mix to see where the clumps join. The joins are the natural break points; pull them apart by hand where possible, and cut through the rhizome with a clean knife where it is too tough. Aim for pieces of two or three shoots each, with a good mass of the white, branching roots attached [3]. Single-shoot pieces root, but they take longer to fill a pot.
Choose pieces by variegation as well as by size. A Triostar crown that has gone all green carries only the green genotype in its growing layers and is very unlikely to return to the pattern; periclinal chimeras can become uniform when cells of one layer divide into another and displace it [8]. Discard or grow on all-green pieces separately, and keep the crowns that show the cream and pink pattern. Reversion is covered in more detail on Triostar losing its pink.
Pot each division at the depth it grew before, in a pot only a little larger than its roots. The RHS recommends a peat-free potting compost under glass, watered freely in growth [6], and its profile lists moist but well-drained soil [6]. North Carolina State Extension warns that overwatering can cause root and stem rot [5], and a fresh division has cut surfaces and fewer roots to take up water, so the mix should be damp, not wet, until new growth shows.
What goes wrong after division?
Leaf curl and limp leaves in the first weeks are expected. A Stromanthe thalia leaf is broad and thin, and UF/IFAS Extension identifies high humidity as the key requirement for Triostar [7]. After division the reduced root system cannot replace water as quickly as the leaves lose it, so the plant needs humid air and shade from direct sun, which UF/IFAS notes can scorch Triostar leaves into brown splotches [7]. Removing one or two of the largest leaves on a small division reduces that water demand.
Collapse at the base is the more serious failure. Root and stem rot follow overwatering in this species [5], and a division sitting in cold, wet mix is the classic case. New shoots from the rhizome are the sign that roots have re-formed. Glasshouse red spider mite is the pest the RHS lists for the species [6]; stressed divisions in dry air are the most vulnerable. For general growing conditions, see Triostar care.
Frequently asked questions
Can a Triostar be grown from seed?
Not true to type. Seed derives from one cell layer, the L2, so it cannot carry a layered variegation pattern [8], and albino plastid mutations are typically lethal in a seedling on their own [9]. Division keeps the pattern [3].
When is the best time to divide a Stromanthe?
In spring before new growth starts, according to North Carolina State Extension [5]. The RHS also gives dormancy or the period after flowering, to minimise root damage [6].
Can a Stromanthe be propagated from a stem cutting?
The patented Stromanthe stromanthoides 'ROTOLANTE10' has been propagated by vegetative cuttings and tissue culture [4]. No published method for rooting cuttings of Stromanthe thalia or Triostar was located, so division is the reliable route.
How many plants can one Triostar give?
It depends on the number of crowns. A 20-week-old plant of the variegated cultivar 'Valmic' had about nine clumps [3], so a mature plant can usually give several divisions of two or three shoots each.