Prayer plant cuttings: rooting Maranta at the node, in water or mix · ← Maranta Updated 2026-10-09

MARANTA

Prayer plant cuttings: rooting Maranta at the node, in water or mix

Why Maranta roots from a stem cutting when most calatheas cannot, where the node is, and what the only published rooting times say.


Short answer

A prayer plant (Maranta leuconeura) can be grown from a stem cutting because, unlike most calatheas, it makes short leafy aerial stems with joints (nodes) along them [3][1]. A cutting taken just below a node can root in water or in a moist mix. The one published rooting record for the species, the 'Beauty Kim' plant patent, gives about 3 weeks to first roots and about 5 weeks to a rooted cutting at 21 °C [4].

Why does Maranta have stems to cut when most calatheas do not?

Every plant in the Marantaceae grows from a rhizome, but what rises above the soil differs by genus. The Flora of North America family treatment notes that the aerial stems may be branched or unbranched and that leaves may be basal, on the stem (cauline), or both [1]. Botanists call a plant whose leaves rise from ground level in a tuft rosulate, and one with a visible leafy stem caulescent. In the 2025 study that named the new genus Dolichopoda, the authors tabulate Maranta in its broad sense as rosulate, caulescent, zingiberoid or scandent (scrambling), a wider range of habits than its relatives in the same clade [3].

Maranta leuconeura is on the caulescent side of that range: its leaves are carried on short, branching aerial stems that lengthen and arch over the pot edge, which is why NC State Extension lists it for hanging baskets and as an interiorscape ground cover [5]. The calatheas sit on the other side. Hammel's account of Costa Rican Calathea describes aerial shoots that are unbranched, with leaves mostly borne near the base [2], and a survey of understory herbs at La Selva found that most Marantaceae had basal or subbasal leaves, the exceptions being Goeppertia marantifolia and G. warscewiczii with cauline leaves [6]. A plant whose leaves all rise from the rhizome has no stem node above ground to cut, which is why most Goeppertia are divided, not cut.

What is a node, and why must the cutting include one?

A node is the joint on a stem where a leaf attaches. In Maranta each leaf is built in three parts: a sheath that wraps the stem, a stalk (petiole) and the blade, and the Flora of North America notes that the overlapping sheaths support the stem [1]. Where a sheath meets the stem there is a bud, and that bud and the tissue around it are where new shoots and roots arise. The length of stem between two nodes, the internode, has no bud and does not root on its own.

That is the reason for the rule every grower repeats: cut just below a node, not halfway along an internode. On a Maranta leuconeura stem the node is easy to find, as a slight swelling where a leaf sheath clasps the stem, often where a branch has already started. A cutting that carries one or two nodes and one to three leaves has both a root-forming site and enough leaf area to feed the new roots without losing more water than the stem can supply. The 'Beauty Kim' patent records stems of about 5 cm on a finished 10-cm pot plant [4], so a Maranta cutting is short: a node or two, not a long trailing piece.

Do not confuse the node with the pulvinus, the swollen joint at the top of each leaf stalk that moves the blade up at night. The pulvinus is a motor organ, not a growing point, and a leaf cut off with its pulvinus but no stem node will not grow into a plant.

How long does a Maranta cutting take to root?

The only published rooting times for Maranta leuconeura located for this page come from US Plant Patent PP11962, granted in 2001 for 'Beauty Kim', a whole-plant mutation of M. leuconeura var. kerchoveana [4]. The patent describes the type of propagation as vegetative cuttings, with about 3 weeks to initiate roots and about 5 weeks to produce a rooted cutting, both at 21 °C, and describes the roots as numerous and freely branching [4]. It adds that about 12 weeks take a rooted cutting or tissue-cultured liner to a finished 10-cm container [4].

Those figures come from a commercial greenhouse in Apopka, Florida, with days of about 21 to 32 °C and nights of about 18 to 21 °C [4], so they are a best case. A cutting on a cool windowsill roots more slowly: root initiation is cell division and growth at the node, and the patent's own figures are tied to 21 °C, the bottom of the greenhouse's daytime range. The patent does not say whether the cuttings were rooted in water or in a substrate.

Water or mix for prayer plant cuttings?

No published trial comparing water and substrate rooting for Maranta was located in Europe PMC or Google Patents as of 2026-10-09, so the choice rests on how the cutting works. Both methods do the same job: keep the node wet and warm while the leaves stay hydrated. Water lets you watch the roots appear; a moist, airy mix gives roots that are already adapted to soil, so the move to a pot is gentler.

The risks follow from the anatomy. In water, only the node needs to be submerged; a leaf sheath or blade held under water softens and rots, and the rot spreads into the node. Change the water when it clouds: cloudiness is microbial growth, and those microbes compete with the submerged node for the oxygen it needs to build roots. In mix, the danger is the opposite: a cutting with no roots cannot draw water, so it relies on humid air to keep its leaves from wilting. NC State Extension lists Maranta leuconeura as intolerant of low humidity and of direct sun [5], and a rootless cutting is the most sensitive form of the plant to both. A clear cover or a propagation tray over cuttings in mix serves the same purpose as the water jar: it keeps the cutting hydrated until it can hydrate itself.

Move water-rooted cuttings to mix once the roots are a few centimetres long and branching. The patent's description of numerous, freely branching roots [4] is the sign a cutting is ready to support itself.

Taking and rooting a Maranta stem cutting, step by step

  1. Choose a healthy, arching stem with at least one node below the lowest leaf you want to keep.
  2. Cut with a clean blade just below a node, leaving a short stub of stem beneath it.
  3. Keep one to three leaves; remove any leaf whose sheath would sit in water or below the mix surface.
  4. Set the node in water or in a moist, free-draining mix, in warmth and bright shade, never direct sun [5].
  5. Expect first roots in about three weeks at 21 °C and a rooted cutting in about five [4]; cooler rooms take longer.
  6. Pot several rooted cuttings together for a fuller plant, since one Maranta cutting makes one stem system.

Take cuttings only from clean plants. In 2009 red-veined prayer plant cuttings shipped from Costa Rica to central Florida nurseries carried a strain of Sugarcane mosaic virus, showing a mosaic on the upper leaf surface and chlorotic lesions beneath; most infected plants lacked vigour and eventually died, and the authors noted that infected cuttings can greatly decrease production of the plant [7]. A cutting is a clone, so it carries whatever the parent carries.

Why a rooted cutting is still fragile

A Maranta cutting starts with no rhizome, which is the organ that stores reserves and makes new shoots in an established plant. Field work on Calathea marantifolia (now Goeppertia marantifolia [6]), one of the few cauline members of the family, followed vegetative offspring that pass through pre-rooting and post-rooting stages: survival of offspring cut from the parent before rooting fell by 10%, while offspring that had rooted were unaffected [8]. The lesson for a home cutting is the same: until it has roots of its own, it has nothing behind it.

Give a newly potted cutting the conditions the patent describes for young plants (warmth, bright shade, steady moisture) [4] and wait for a new leaf to unroll from the node before feeding. The first new leaf shows that the node has started a new stem system, and in time a rhizome, of its own.

Frequently asked questions

Can I root a single Maranta leaf in water?

Only if it comes with a piece of stem and a node. The node is where buds and roots arise; the pulvinus at the top of the leaf stalk is a motor joint, not a growing point. The Flora of North America describes each leaf as sheath, petiole and blade [1], and only the stem under the sheath can root.

Why will my calathea cutting not root like my prayer plant?

Most calatheas have no stem to cut. Hammel describes Costa Rican Calathea with unbranched aerial shoots and leaves mostly near the base [2], and most La Selva Marantaceae had basal or subbasal leaves [6]. They are propagated by division of the rhizome instead.

How long do prayer plant cuttings take to root?

The 'Beauty Kim' plant patent gives about 3 weeks to initiate roots and about 5 weeks to a rooted cutting at 21 °C, in a Florida greenhouse [4]. Cooler indoor conditions lengthen both figures.

Are cuttings of a red or lemon-lime prayer plant true to the parent?

Yes. A cutting is vegetative, so it is the same clone. The 'Beauty Kim' patent records that vegetative cuttings and tissue culture reproduced that sport true to type in successive generations [4]. Seed-grown plants are not guaranteed to match.

Digital Towns Market

In stock at Digital Towns Market

See all in this collection

See an error, or have documentation we lack? Submissions open shortly. Corrections are reviewed against documentation before the record changes.

Sources

  1. Marantaceae (H. Kennedy), Flora of North America Vol. 22 (2000-01-01). Flora of North America Association. https://floranorthamerica.org/Marantaceae Accessed 2026-10-09.
  2. The vascular flora of La Selva Biological Station, Costa Rica: Marantaceae (B. E. Hammel), Selbyana 9: 234-242 (1986-01-01). Marie Selby Botanical Gardens. https://journals.flvc.org/selbyana/article/download/120815/119333 Accessed 2026-10-09.
  3. Molecular phylogenetics and morphological analyses support Dolichopoda, a new Neotropical genus of Marantaceae (Luna, Coutinho, Chase, Felix & Pessoa), Plants 14(22): 3486 (2025-11-15). MDPI (PubMed Central). https://pmc.ncbi.nlm.nih.gov/articles/PMC12656207/ Accessed 2026-10-09.
  4. USPP11962P2, Maranta plant named 'Beauty Kim' (inventor Brian Gold) (2001-06-26). Google Patents (USPTO full text). https://patents.google.com/patent/USPP11962P2/en Accessed 2026-10-09.
  5. Maranta leuconeura, North Carolina Extension Gardener Plant Toolbox (n.d.). NC State Extension. https://plants.ces.ncsu.edu/plants/maranta-leuconeura/ Accessed 2026-10-09.
  6. Functional traits of broad-leaved monocot herbs in the understory and forest edges of a Costa Rican rainforest (Rundel et al.), PeerJ 8: e9958 (2020-01-01). PeerJ (PubMed Central). https://pmc.ncbi.nlm.nih.gov/articles/PMC7597634/ Accessed 2026-10-09.
  7. A new host diagnosed with a strain of Sugarcane mosaic virus in Florida: red-veined prayer plant (Maranta leuconeura erythroneura) (Baker, Wilber & Jones), Plant Disease 94(3): 378 (2010-03-01). American Phytopathological Society (abstract via Europe PMC). https://doi.org/10.1094/PDIS-94-3-0378C Accessed 2026-10-09.
  8. Ephemeral clonal integration in Calathea marantifolia (Marantaceae): evidence of diminished integration over time (Matlaga & Sternberg), Am. J. Bot. 96(2): 431-438 (2009-02-01). Botanical Society of America (abstract via Europe PMC). https://doi.org/10.3732/ajb.0800164 Accessed 2026-10-09.

Published by Rytas Dirse, Solo Founder & AI Architect

Built with AI, held to quality gates. US sources, US brands, facts only.

How this page was made

Digital Towns uses AI assistance to research and write its guides, and every page is only as good as the sources it cites. Our goal is the most accurate, useful local information possible.

This page was fact-checked twice before publishing.

If you see an error, or anything you can show is false, tell us right away and we will take a third look.

Report an error
Quote or describe the part that's wrong.
Explain what's actually true.
Only if you'd like a reply. Never shown publicly.

How we fact-check